American hash HACH SOLITAX? Sc turbidity / suspended solids (sludge concentration) analyzer paint Miss: 18,862,104,458 QQ: 1248602809 suspended solids line analyzers can be used for measurement in sewage treatment plant sludge concentration, evaluate the quality of the activated sludge or entire biological process; waterworks filter backwash water turbidity measurements, the measurement of the raw water and sedimentation tank effluent turbidity; industrial production process / cycle cooling water quality. Hash turbidity / suspended solids analyzer using a dual-beam infrared scattered light photometer detection technology. FEATURES ● this suspended solids analyzer can both detect turbidity, suspended solids can also detect (or sludge) concentration ● double beam infrared scattered light photometer detection technology ● probe has a self-cleaning function ● LED emitted is 880nm the near-infrared light, the color compensation samples ● a variety of installation methods in SOLITAXTM sc turbidity / suspended solids the online analyzer measurement probe internal, located in a 45 ° angle with a built-in LED light source, 880nm near-infrared light can be emitted to the sample , the beam, after the scattering of the particles in suspension in the sample, is located in the incident light into a 90 ° angle of the scattered light is detected by this aspect of the detector, and after the calculation, whereby the sample turbidity. When the measurement of the sludge concentration, located in the incident light into a scattering angle of 140 ° to light from the direction of the detector after detection, and then the online analyzer of the suspended solids by calculating, after the detector detects the signal strength, which gives sewage The mud concentration values. 880nm near-infrared light emitted from the LED, the sample color, suspended solids does not affect the measurement results of technical indicators measuring units: Optional NTU, FNU g / L, mg / L, ppm, or The% solids measurement accuracy: turbidity of less than 1% of reading or ± 0.001NTU, whichever is greater suspended solids: less than 5% of reading (depends on the the sludge homogeneity) Repeatability: Turbidity: less than 1% of reading; Suspended solids: less than the reading of 3% (whichever is greater) Response time: 1 second installation method: pipe plug-in installed ball valves, minimum diameter of 100mm (carbon steel and stainless steel); installed to use the edge of the pool and fixed installation immersion sample flow rate: 3m / s Operating temperature: 0 ~ 40 ℃ sample temperature: 0 ~ 40 ℃ sample pressure: the largest 6Bar probe size: plug-in: 60 x 315mm immersion sensor: 60 × 200mm Probe Weight: plug-in: 2.4KG; immersed type: stainless steel 1.38KG, PVC material the 0.52KG cable length: Standard: 10 m, the maximum length of 100 m of additional cable options: 7.6 m, 15.2 m, 30.5 m, the Order Guide SOLITAXTM sc turbidity / suspended solids analyzer, standard configuration includes: sc200 controller, probe, operating manual, the probe installed the attachment mounting accessories LZX414.00.10000 immersion installation accessories 57384-00 pipeline plug-in installation accessories 69405-00 water plant filter backwash water turbidity monitoring installation accessories LZX050 scraping the piece five loaded contacts: paint Miss QQ: 1248602809 Hotline: 18862104458 Micro Signal: Hilda-xjf E-mail: Hilda610@yahoo.cn